A dial indicator displays the cutting depth of the tool
切割深度由千分表表示
The process is automatically terminated
切割完毕自动终止装置
The Stage is a spring-loaded mechanism that presents the material
parallel to the cutting tool
样品承载台在整个切割过程中始终垂直切割工具
The driving frequency is 26KHz
驱动频率为26KHz
The Stage is a spring-loaded mechanism that presents the material
parallel to the cutting tool
样品台通过弹簧装置将样品垂直切割头方向运动,所以切割后的圆片是严格
意义上的圆柱体
配置特殊的工具,可以切割2X3mm的方形样品.直径3mm的园型样品
The Model 170 Ultrasonic Disk Cutter is an effective device for initial cutting of a TEM specimen from most types of materials. Specimen disks or rectangular wafers are produced by an ultrasonic technique that combines the oscillation of two lead zirconate titanate crystals at 26kHz with an abrasive media at the contact point of the cutting tool with the specimen, rapidly resulting in a high-quality sample. This cutting process minimizes specimen damage and an automatic terminator stops cutting when the tool comes in contact with the specimen plate.
从大块硬的或脆的样品上切割出3mm直径的电镜样品圆片.精确的控制使得对样品的损伤降致最小.检测装置能够控制切割过程自动终止.特别的设计使的能切割样品的最小厚度可达40um.
