Katanax Fusions for Cement

2011/11/03 14:51

阅读：1

应用领域：

发布时间：

2011/11/03

检测样品：

检测项目：

浏览次数：

1次

下载次数：

5次

参考标准：

方案摘要：

The 8-correction approach has great advantages: it takes the best from the numerical correction methods, and leaves behind most of their inconveniences; it is simple to apply and very accurate; it is particularly well suited to the analysis of industrial products where composition variations are usually not very large. The authors believe that the 8 method will be in common use in the near future. A paper on the analysis of cements appears in this Journal (11); although that paper is not intended to be a typical example of application of the 6 method, it nevertheless shows that the method offers definite advantages in relation with accuracy and simplicity.

Preparation of ultra®ne TiC±Ni cermet powders

Effect of the heating rate

相关方案

连华科技医疗污水检测方案

医疗污水包含了多种细菌、重金属、有机溶剂及酸碱溶液等生化有毒有害物质。如上述物质直接排放，将会对自然生态及人类生活环境造成危害。我国对医疗污水有清晰的排放标准。连华科技对于《医疗机构水污染物排放标准GB18466-2005》中所涉及的参数，多款便携及实验室仪器及耗材可满足检测需求

环保

2020/02/14

4D-脂质组学高通量工作流程

Lipid profiling from complex lipid extracts can be a challenging and time consuming task. The high complexity of samples and co-elution of isobaric or isomeric compounds complicate the confident annotation of lipids. The presented 4D-Lipidomics workflow simplifies and streamlines the annotation and validation process using mobility-enhanced MS data.

医疗/卫生

2021/03/05

基于紫外分光光度法的水中油测试方法

矿物油组成中的共轭体系物质在紫外光区有较强的吸收，依据朗博 - 比尔定律，在256nm紫外光波长，可测定油样的吸光度来确定相应油的量。由于紫外光度法对于油种的敏感性较强，本方法的油样需采用标准物质。

环保

2021/05/31

称量仪器的校准

当称量仪器用于与质量控制相关的测量时，校准是必须定期执行的关键操作之一。国际上有许多标准规范都有这方面的要求，例如ISO9001、GMP法规以及与食品安全相关的一些标准。然而关于校准的定义、实施和校准的具体操作在全球范围内并没有一个完全统一的标准。在此，我们首先需要了解一下什么是校准，以及与调整和检定的区别。

其他

2022/04/23

大家都在看