仪器简介：
Dynisco ASN冲击试验样品自动刻缺口机可在塑料和其它相关材料的样品上刻打缺口，以进行ISO和ASTM标准的冲击实验。标准的45度单齿碳化物切刀，半径0.25毫米。还有包括1毫米在内的多种切刀可供选择。
技术参数：
Standards: ASTM D256,ISO 180,DIN53753,BS2782,JIS K 6871,UNI6323
Dimensions: 56cm x 38cm x 26cm
Cutter Speed: 0-137 m/min(0-45000000ft/min)
Cutter: Single or multi-tooth 45 °cutter with 0.25 mm (0.010 in) radius
Weight: 55kg (120lbs)
Depth of Material Under Notch: 1.106cm
Sample Table Speed: 0-16cm/min (0-63 in/min)
主要特点：
1. Automatic notching up to 16(0.3175cm/0.125 in) samples
2. Variable cutter/table speeds
3. Air sample cooling
4. Safety shut-off
5. 45°single carbide tooth cutter
6. Special cutters available
7. Notch verification tester in either English or SI units
