您好,欢迎访问仪器信息网
注册
标准集团(香港)有限公司

关注

已关注

已认证

粉丝量 0

当前位置: 标准集团 > 解决方案 > 盐雾试验箱操作流程

盐雾试验箱操作流程

2016/08/16 15:26

阅读:111

分享:
应用领域:
其他
发布时间:
2016/08/16
检测样品:
检测项目:
老化测试
浏览次数:
111
下载次数:
参考标准:
ASTM G85-98

方案摘要:

安装注意事项 一、盐雾试验箱补水系统安装 1、水质要求:工业用水或自来水加装过滤器(过滤后水的酸碱度在6.5~7.2之间)或纯净水(矿泉水含有矿物质不能使用) 2、压力要求:水压在1~3公斤,以保证补水之正常。 3、接口要求:设备补水口处需以软管连接,使用密封圈固定,以防止渗漏。 二、盐雾试验箱供电系统要求 1、电源要求:单相 AC 220V 50Hz 2、电流要求:Max 15 A 3、保护要求:需安装独立的漏电保护开关 三、盐雾试验箱进气系统安装 1、压力要求:空气压缩机或空气供应管气压≥3公斤,且干燥与清洁 2、接口要求:设备使用快速接头方便拆卸和维修 3、时间要求:设备正常工作时必需长时间供应气源中途不得中断 四、盐雾试验箱排气系统要求 1、材料要求:必需使用PVC聚乙稀材料(耐腐蚀) 2、接口要求:设备排气口处需以硬管连接,使用密封胶密闭,以防止漏气。 3、钻孔要求:设备为自然排气,墙面开孔高度需略高于排气孔,确保气体凝露后流回试验室 五、盐雾试验箱排水系统安装 1、钻孔要求:设备为自然排水无压力,墙面开孔高度需低于排水口,确保排水工作正常 2、接口要求:设备排水口处需以软管或硬管连接,使用密封圈固定,以防止渗漏。

方案详情:

安装注意事项

一、盐雾试验箱补水系统安装

1、水质要求:工业用水或自来水加装过滤器(过滤后水的酸碱度在6.5~7.2之间)或纯净水(矿泉水含有矿物质不能使用)

2、压力要求:水压在1~3公斤,以保证补水之正常。

3、接口要求:设备补水口处需以软管连接,使用密封圈固定,以防止渗漏。

二、盐雾试验箱供电系统要求

1、电源要求:单相 AC 220V 50Hz

2、电流要求:Max 15 A

3、保护要求:需安装独立的漏电保护开关

三、盐雾试验箱进气系统安装

1、压力要求:空气压缩机或空气供应管气压≥3公斤,且干燥与清洁

2、接口要求:设备使用快速接头方便拆卸和维修

3、时间要求:设备正常工作时必需长时间供应气源中途不得中断

四、盐雾试验箱排气系统要求

1、材料要求:必需使用PVC聚乙稀材料(耐腐蚀)

2、接口要求:设备排气口处需以硬管连接,使用密封胶密闭,以防止漏气。

3、钻孔要求:设备为自然排气,墙面开孔高度需略高于排气孔,确保气体凝露后流回试验室

五、盐雾试验箱排水系统安装

1、钻孔要求:设备为自然排水无压力,墙面开孔高度需低于排水口,确保排水工作正常

2、接口要求:设备排水口处需以软管或硬管连接,使用密封圈固定,以防止渗漏。


下载本篇解决方案:

资料文件名:
资料大小
下载
盐雾试验箱操作流程.docx
17KB
相关方案

台阶仪在三维形貌表征领域的应用

Stylus-based surface profiling is a standard technique for accurate, repeatable surface shape, topography and step height measurement in applications ranging from semiconductor R&D to solar cell QC.

2008/12/15

NanoBrook产品应用-12-ZetaPALS

文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine

2015/04/16

4D-脂质组学高通量工作流程

Lipid profiling from complex lipid extracts can be a challenging and time consuming task. The high complexity of samples and co-elution of isobaric or isomeric compounds complicate the confident annotation of lipids. The presented 4D-Lipidomics workflow simplifies and streamlines the annotation and validation process using mobility-enhanced MS data.

医疗/卫生

2021/03/05

磷酸样品中TOC的测定-紫外湿法氧化

磷酸中杂质的监测对于其应用至关重要。除其它参数外,总有机碳还作为总量参数应用于质量控制中,用于评估有机杂质的整体污染情况。 本文主要对紫外-过硫酸盐氧化法和NDIR检测器对磷酸中TOC杂质的全自动质量控制进行验证。

石油/化工

2022/07/12

推荐产品
供应产品

标准集团(香港)有限公司

沟通底价

提交后,商家将派代表为您专人服务

获取验证码

{{maxedution}}s后重新发送

获取多家报价,选型效率提升30%
提交留言
点击提交代表您同意 《用户服务协议》 《隐私政策》 且同意关注厂商展位