非接触型小量程直流扭矩测量传感器

仪器简介：
Nonlinearity (% of full scale)
 ±0.1
 
Hysteresis (% of full scale)
 ±0.1
 
Nonrepeatability (% full scale)
 ±0.06
 
Accuracy (combined nonlinearity, hysteresis and non-repeatability, % of full scale)
 ±0.15
 
Rotational Effect on Zero (% of full scale)
 ±0.05
 
Remote Calibration Accuracy (% of full scale @ 75 deg F; traceable to NIST)
 ±0.05
 
Temperature Effects: 
   
Zero (% of full scale/deg F.)
 ±0.003
 
Span (% of reading/deg F.) 
 ±0.003
 
Compensated Range 
 +75 to +175 deg F
 
Minimum Useable Range 
 -25 to +185 deg F
 
Storage Range 
 -65 to +225 deg F
 
Outputs:
  
 
Clockwise Torque

 +5 Volts
 
Counterclockwise Torque -5 Volts 
Bandwidth:   
High Frequency Output dc to 500 Hz 
Low Frequency Output dc to 1 Hz 
Input Power 10.5 to 24 volts dc @ 85 mA, nominal 


技术参数：
扭矩测量范围：0.071-1.412Nm, 200%,400%
输出范围：正反±5V
抗电磁干扰
频率响应范围：0-500Hz
电源：10.5-24VDC，85mV


主要特点：
These low range models are available in capacities from 10 ozf-in to 200 ozf-in with overload ratings of 2X,4X full scale. With integrated signal conditioning electronics, they have dual ±5 volt dc outputs for direct interface with PC, PLC controllers and data acquisition systems.

When installed between a driver and load, the sensor will measure static and dynamic shaft torque and speed (optional). A strain gaged titanium shaft senses torque and cancels bending and thrust. Robust, ferrite free rotary transformers connect the gages to noise immune carrier amplifiers. They don't generate noise or wear, are immune to magnetic fields, noise, vibration, lubricants and other hostile environments.

These models incorporate new technology that hardens them to EMI generated by IGBT based adjustable speed drives. High stiffness to inertia ratios makes these sensors ideal for stepper motor and other dynamic applications. Maximum speed rating is 25,000 rpm. A dual track 512 PPR encoder is optional as is a line driver for its output(s).