IKA 研磨机 MultiDrive control MT Package

Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes MT 150 and the required TC 1 protective housing for dry samples.

MT 150 is a disposable tube with a typical stainless steel beater. The plastic milling tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the milling tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the grinding chamber can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery.

MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively.

High performance
Excellent crushing performance is guaranteed by a combination of
variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,
and a 1000 Watt output.

Interval operation
The option of interval programming is simple to activate at the
press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.

Integrated cooling
A cooling system is integrated in the milling cup, which allows
indirect heat dissipation. Thus, coolant and sample remain separate.

TFT-display
A clear TFT-display guarantees user-friendly operation.

Temperature measurement
MultiDrive control offers temperature measurement and vessel
recognition using RFID. A temperature limit can be set for
temperature-sensitive materials, or for specific planned reactions to
protect against overheating.

Weighing function
The weighing function is also integrated into the user-friendly
workflow of the IKA MultiDrive control. Weighing is performed
before crushing using the same mixing cup, so that no transfer
of contents is required.

在没有交叉污染的情况下进行粉碎--这可以通过MultiDrive控制包实现，其中包括可高压灭菌的一次性试管MT 150和用于干燥样品的所需TC 1保护罩。

MT 150是一次性试管，带有典型的不锈钢打机。塑料研磨管可以进行高压灭菌。这有效地防止了交叉污染，即使它被多次使用。一个集成的RFID芯片同时存储并限制了研磨管的使用寿命。供货范围内包括5个备用密封圈。通过更换密封圈，可以延长研磨室的使用寿命。一次性研磨管只能与TC 1保护壳一起操作，该保护壳也包含在供货范围内。

由于有多种容器可供选择，MultiDrive通用破碎机可以执行涉及粗碎和细碎的广泛的破碎任务。有一个USB接口，可以分别方便地进行驱动和记录。

高性能

卓越的破碎性能是由以下组合保证的

可变转速，从3000rpm到20000rpm。

和1000瓦的输出功率。

间隔操作

间歇式编程的选择很简单，只需按下一个按钮就可以激活。

按一个按钮就可以激活。间隔操作是一种资产，在粗碎坚硬的样品或额外彻底的粉碎过程中。

坚硬样品的粗碎过程中或用于额外的彻底混合。

集成冷却

一个冷却系统集成在研磨杯中，可以间接散热。

间接消散热量。因此，冷却剂和样品保持分离。

TFT显示

清晰的TFT显示屏保证了用户友好的操作。

温度测量

MultiDrive控制提供温度测量和使用RFID的容器识别。

使用RFID识别。可以为温度敏感的材料或特定的计划反应设置温度限制。

对温度敏感的材料或特定的计划反应设置温度限制，以防止过热。

防止过热。

称重功能

称重功能也被整合到IKA MultiDrive控制的用户友好型工作流程中。

IKA MultiDrive控制器的工作流程。称重是在

在粉碎前使用同一个混合杯，因此不需要转移内容物。

所以不需要转移内容物。