北京朗迪森科技有限公司Turbiscan LAB稳定性分析仪
北京朗迪森科技有限公司Turbiscan LAB稳定性分析仪

面议

暂无评分

麦奇克/Formulaction

下载

LAB

--

欧洲

  • 一般经销商
  • 营业执照已审核
核心参数

产地类别: 进口

产品介绍

      稳定性分析仪Turbiscan应用多重光散射的原理, 检测器所得到透射光和背散射光强度是直接由分散相的浓度(体积百分数)和平均直径( 或是粒子/微滴/气泡的平均直径)决定的。通过测量透射光和背散射强度的变化,就可以知道样品在某一截面浓度或颗粒粒径的变化。该仪器对所分析的样品可以有一个宽的范围,粒子尺寸范围从0.1微米-1毫米,其样品的浓度可以达到体积百分比95%。 

      稳定性分析仪Turbiscan的测量探头是由一个脉冲式的近红外光源 (波长880 nm )和两个同步的检测器组成: 透射光检测器是用于研究透明清澈的产品,背散射光检测器是用于研究高浓度的产品。仪器的工作原理为:测量探头收集透射光和背散射光的数据, 在55mm长度上每40 微米扫描一次。得到的图形在浓度上和粒子直径上表征了样品的均匀性,编辑其测量次数, 然后沿着样品不断重复扫描, 从而得到一张表征产品稳定性或不稳定特征的指纹图谱 。

      TURBISCAN LAb数据收集方式分为两种,一为扫描方式:沿着55 mm的扫描高度每 40 μm收集一次数据,在环境温度下每20秒钟做1次扫描并收集数据, 每30秒温度控制一次。可设置多达 250个扫描程序。二为固定位置方式,从Turbiscan Lab 仪器的可见显示屏上操作: 在一个选定的位置上(选定样品的高度上)每秒钟测量一次,或在计算机上编辑可操作程序进行加速试验。应用这些功能, 样品中的粒子由于聚结、絮凝或团聚现象造成的粒子粒径的变化及位置的变化可以被实时监测。从而可以计算样品中粒子平均直径的变化,粒子的迁移的速度及由于颗粒的迁移造成的浓度变化即分层厚度的随时间变化。

      TURBISCAN LAb的特点是测量且无须对浓缩分散相进行稀释。从而确保产品在粒子尺寸和/或它的浓度方面符合所要求的技术规格。

      TURBISCAN LAb分三种型号,其中,Thermo(恒温型)、expert(专家型)仪器装有温度调节装置, 可控制温度范围在高于环境温度5°C至+60°C 之间,温度控制精度为 ± 0.5°C。

      全能稳定性分析仪Turbisoft软件可以得出下面的几种分析结果:

1、背散射光通量BS和透射光通量T相对时间的变化曲线。

2、相厚度随时间的变化曲线。

3、粒子迁移速度相对时间的曲线和粒子的流体动力(水力)平均直径。

4、物理不稳定性定量动态分析: 粒子平均直径相对时间变化的曲线或者样品浓度相对时间变化的曲线。

5、光子的平均自由光程或者传送的平均自由光程 , d (平均直径), phi (浓度-体积百分数),TSI稳定性指数。

6、TSI稳定性指数。(TSI是对整个分散体系稳定性的一个评价,其数值越大,就越不稳定)。

二、主要技术指标

1、粒子尺寸的测量范围: 0.05-1000um。

2、粒子浓度: 体积浓度0.001-95%。

3、测量技术: 多重光散射。

4、重复性: 1%

 

三、测量部件

1、发射源: 近红外光源(880 nm)。

2、检测器: 发射光和背散射光两个光敏二极管。

3、温度范围:环境温度以上5°C到60°C,温度控制精度为± 0.5°C。

4、样品池: 平底的玻璃池( 外径: 27.5mm – 高度: 70mm)随同带有螺纹黑顶盖及丁基/聚四氟乙烯密封圈。

 

四、主要配置

仪器发货时其包装箱内随带下面物品:

1、TURBISCAN LAb主机一台。

2、测量池100个,外径: 27.5mm ,高度: 70mm,随同带有螺纹黑顶盖及丁基/聚四氟乙烯密封圈。

3、软件 Turbisoft软件安装程序1个。

4、检验标准品,硅油一瓶,用于透射光检测器,聚四氟乙烯一瓶,用于背散射光检测器。

5、用户操作手册1本。

6、样品池架1个。


  • The world of drug delivery is getting every day more efficient with new product forms, which are directly targeting the deficient organs. Colloidal systems such as emulsions (simple or multiple) or nanoparticle suspensions are now widely used as drug carriers or nutritional solutions in this respect. These new product forms allow better targeting and assimilation for the patient, and give rise to new solutions for drug designers. However, the stability of these inherently unstable colloidal systems makes them complex to formulate and study.

    366MB 2019-03-20
  • Asphaltenes are causing major problems in the extraction process of crude oil as they can lead to fouling & clogging in pipes or even in the entire well when they aggregate. Moreover asphaltenes play the role of natural emulsifier which stabilises water-in-oil emulsions formed during production of crude oil. Asphaltenes also have an impact on the refinery efficiency and the fuel oil quality. To overcome these technical issues, chemical additives are used. It is therefore important to have a technique that can identify the most suitable additive, but also to measure accurately the stability of oil or emulsions

    570MB 2019-03-20
  • 介绍多重光散射仪/稳定性分析仪在食品化妆品行业中的应用概况,该仪器适用于研发、质量控制、工艺优化等阶段,可用于分析所有液态分散体系的物理不稳定现象。

    864MB 2019-03-20
  • Gelling can be obtained through two main mechanisms: creation of a network due to a reticulation of polymers (it is the case for gelatin) or aggregation of particles (it is the case in yogurt). In the cosmetics industry it is commonly used to get various textures.

    148MB 2008-08-07
用户评论
暂无评论
北京朗迪森科技有限公司Turbiscan LAB稳定性分析仪信息由法国Formulaction为您提供,如您想了解更多关于北京朗迪森科技有限公司Turbiscan LAB稳定性分析仪报价、型号、参数等信息,欢迎来电或留言咨询。
移动端

仪器信息网App

返回顶部
仪器对比

最多添加5台