挤出机

报价

¥50万 - 100万

暂无评分

品牌

Goettfert

样本

暂无样本

型号

X-Trude 1400

荣誉奖项

产地

欧洲

仪尊科技有限公司

银牌
第20年
一般经销商

营业执照已审核

留言询价电话询价

核心参数

同类推荐

看了挤出机/注塑机的用户又看了

产品介绍相关方案售后服务承诺用户评论问商家

产品描述

德国 Goettfert 公司拥有超过半个世纪的流变分析经验，并不断纳入我们的挤出机和流变测试设备系列中。新的X-trude系列挤出机设计紧凑 ,配备了多个压力传感器和温度传感器，液体冷却系统可以有效避免进料区中测试材料的塑化，同时可以实现连续显示剪切速率，剪切应力和粘度。X-trude可以作为喂料挤出机与各种测试设备连接，如：在线流变仪、在线薄膜检测系统等。

基本特征

· 扭矩为1400Nm（X-trude1400）

· 可选各种不同尺寸的机筒和螺杆

· 最高达 16 段加热，4段冷却

· 温度范围为0 ~ 350℃，分辨率 0.1℃

· 压力传感器测试范围为 0 ~ 100 , 0 ~ 200 , 0 ~ 500, 0 ~1000bar 可选, 误差范围为 0.5%

· 螺杆转速 0 ~ 120rpm 可调

· 通过电脑或触摸屏控制，可以连接可视化软件 "ROSWIN"

· 作为喂料挤出机，其后端可以连接在线流变仪、造粒机、流延膜机、吹膜机、口模胀大单元、熔体拉伸流变仪等装置

主要用途

用于实验室应用，以测量和生产聚合物。

技术参数

类型X-trude	1400
速度	0 - 120 rpm
输出功率	17 kW
扭矩	1400 Nm (单螺杆)
螺杆尺寸	45 mm，其他
温度范围	60~350℃
尺寸	长1580mm×宽600mm×高1300mm
重量	800Kg

相关方案

综合化妆品

爽肤水中流动特性检测方案(挤出机)
ABSTRACT： This is a study of the flow properties of a range of magnetic toners produced from a common base in relation to three physical variables – the milling method, the type and amount of flow additive and to a limited extent, particle size. Two methods of milling were used for sample preparation – air jet milling and mechanical milling. The flow additives were either HMDS or PDMS silicas. The study used the FT3 powder Rheometer (Freeman Technology) to determine the rheology of powder samples in terms of the energy required to cause a powder to flow. The dependence upon environmental factors commonly imposed on powders such as flow rate, the level of aeration and the amount of consolidation are determined for each of the materials. The propensity to retain air is also investigated and quantified. The results clearly indicate the complex nature of toners and how their flow properties are affected by a large number of variables, of which one of the most significant is the effect of aeration and de-aeration representing the transition from fluidisation to consolidation.
化妆品 2017-09-14

爽肤水中流动特性检测方案(挤出机)
ABSTRACT： This is a study of the flow properties of a range of magnetic toners produced from a common base in relation to three physical variables – the milling method, the type and amount of flow additive and to a limited extent, particle size. Two methods of milling were used for sample preparation – air jet milling and mechanical milling. The flow additives were either HMDS or PDMS silicas. The study used the FT3 powder Rheometer (Freeman Technology) to determine the rheology of powder samples in terms of the energy required to cause a powder to flow. The dependence upon environmental factors commonly imposed on powders such as flow rate, the level of aeration and the amount of consolidation are determined for each of the materials. The propensity to retain air is also investigated and quantified. The results clearly indicate the complex nature of toners and how their flow properties are affected by a large number of variables, of which one of the most significant is the effect of aeration and de-aeration representing the transition from fluidisation to consolidation.
化妆品 2017-09-14