找靠谱仪器,就上仪器信息网~

钢材中Mg元素检测产品配置单(等离子体质谱)

  • 应用领域: 钢铁/金属
  • 检测样品: 钢铁
  • 检测项目:含量分析
  • 浏览次数:52 次
  • 下载次数:3 次
  • 发布时间:2017-12-20
  • 参考标准:-
Monitoring and controlling the level of trace element impurities in metals and alloys is important, as impurities can affect the properties of the metal and may degrade the functionality of the finished component. ICP-OES is commonly used for the routine measurement of trace elements in metal samples because of its multi-element capability and tolerance of the high matrix level present in metal sample digests. However, the development of high purity metals and higher-performance alloys requires stricter control of a wider range of trace elements at lower concentrations, so a technique with lower detection limits than ICP-OES is required. ICP-MS offers low detection limits for the elements of interest, but the technique has not previously been considered suitable for the analysis of high matrix samples such as metal digests. For example, conventional ICP-MS instruments may suffer from signal suppression and/or long-term signal drift due to matrix deposition on the interface cones, which affects the signal stability and the accuracy of the analytical results. To overcome this limitation, Agilent’s Ultra High Matrix Introduction (UHMI) aerosol dilution technology has been developed to allow the
  • 配置
  • 品牌型号
  • 参考报价
  • 点赞 ()

  • 收藏

  • 分享

  • 下载

贡献者的其他方案
方案贡献者

安捷伦科技(中国)有限公司

仪信通钻石会员

解决方案总数:0

方案浏览总量: 0

按类找方案