信用积分:58参观人数:77571本月参展商积分:5
根协有限公司
Mooney Sample Cutter
To optimise the performance of your Mooney Viscometer it is recommended that you use a consistant sample volume, and this can be easily achieved by the use of a volumetric sample cutter.
The constant volume cutter operates in two distict ways:
The material is first compressed to a predetermined thickness.
The cutting action takes place, ensuring an exact and constant sample volume.
The built in adjustable time delay allows the user to set the right time to compress the material correctly before that cutting action takes place.
An additional benefit of this type of cutter is that the sample has a hole punched in the middle ready to accept the rotor.
Mooney Sample Cutter
Technical Specifications：
Size： 300mmW*300mmD*800mmH
Weight： 45Kg
Supply： Filtered Air 5 to 8.5 Bar, 75 to 125 PSI
Sample Volume： 13.5cm³ (Nominal)
Nominal Sample Diameter： 45mm
Nominal Sample Thickness： 9mm
Standards： BS EN292: Part 2.
Mooney Sample Cutter
To optimise the performance of your Mooney Viscometer it is recommended that you use a consistant sample volume, and this can be easily achieved by the use of a volumetric sample cutter.
The constant volume cutter operates in two distict ways:
The material is first compressed to a predetermined thickness.
The cutting action takes place, ensuring an exact and constant sample volume.
The built in adjustable time delay allows the user to set the right time to compress the material correctly before that cutting action takes place.
An additional benefit of this type of cutter is that the sample has a hole punched in the middle ready to accept the rotor.
